Toggling the padlock icon 🔒 in the header switches between Reference Mode and Input Mode.
This screen is used when reviewing your round results.
Marker registration and editing are not available.
This mode is used during a round.
You can check the full course view and perform course management while entering shots, putts, and penalties.
This mode is used to enter the information required for analysis.
Swipe up on the black area at the bottom of the screen to display it.
You can enter lie, club, slope, shot shape, and evaluation.
1. Registering Round Information
- Tap the “Start New Round” button on the home screen.
- Set the round information.
- Tap the “Start Round” button.
- The shot input screen will open.
〈Note: iPhone only〉
If “Use Shortcut Feature” is ON in the Settings screen, you will be asked to allow location access. Please change it to “Always”.
2. Registering the Cup Position
- Turn OFF the “Follow Current Location” icon.
- Move the map to the cup (pin) position.
- Tap the cup icon.
- A flag 🚩 will appear on the map.
3. Registering the Tee Position (First Shot)
- Turn ON the “Follow Current Location” icon.
- Stand at the shot position (tee ground).
- Tap the “Register Shot” button.
4. Registering Shots and Shot Results
- Hit your first shot.
- Switch to Detail Input Mode and register the club, slope, shot shape, and evaluation.
(These can also be entered later.)
5. Proceeding to the Next Shot
- Move to the ball’s landing point.
- After arriving at the landing point, tap the “Register Shot” button.
- Hit your second shot.
- Switch to Detail Input Mode and register the club, slope, shot shape, and evaluation.
(These can also be entered later.)
6. Green-in and Putt Registration
- When the ball reaches the green, move to the landing point.
- Tap the “Register Putt” button.
You can also register putts later in a batch.
7. Hole Out
- Tap the “Hole Out” button.
You can make final adjustments on the Hole Result screen.
- Use the “Register Putt” button to add putts near the cup at the end.
- You can make final selections for lie, club, evaluation, shot shape, and slope.
If any information is missing, a “?” will be displayed.
- Penalties can be registered at the appropriate positions.
- Unnecessary data can be deleted.
- After confirming your score, tap the “>” button to proceed to the next hole.
? I want to delete a shot, putt, or penalty
<Method 1>
- Select the target shot using the +/– buttons on the score, or tap the shot marker.
- Tap the trash bin icon at the bottom left.
<Method 2>
- Tap the Hole Out button.
- Tap the × icon at the upper-right corner of the target shot.
- When you delete a shot or putt, any penalties linked to it will also be deleted.
? I want to insert 1st shot
- Move the map to the position where you want to register the shot.
- Tap [Insert 1st Shot] button.
? I want to move a shot position
- Long-press the target shot marker.
- Drag it to the desired location.
? I want to register “Playing 4” (Pre-4)
- Tap the Penalty button twice.
- Select “OB” for one, and “Relief” for the other.
Yard / Meter Display
Displays concentric circles showing the distance from a specified point.
You can check the remaining distance to the green or hazards.
Wind Information
Displays wind information for the selected location.
Useful for choosing the right club and determining shot direction with wind in mind.
Layup Planning
Allows you to measure the distance between any two points between the cup position and your latest shot position.
Use this feature to plan your layup strategy.
Past Round History
You can display up to three previously recorded shot trajectories.
Past Strategy Notes
If you save notes (reflections, cautions, strategies) using the Hole Information button, you can view them here.